Solar Panels for Lead Acid Batteries

Lead acid batteries have large capacities and are often available in many places around the world. But which lead acid battery should you use with solar panels? I recommend using sealed AGM lead acid batteries wherever possible and will describe in this post the trade-offs of using different battery types with portable solar panels.

Shop Solar Panels

Starter vs. Deep-Cycle Batteries

Starter batteries are designed to deliver short, high-current bursts for starting the engine, and are designed to discharge only a very small part of their capacity. A daily cycle of using most the capacity would corrode a car battery very quickly, the plates and the chemistry are designed to stay nearly 100% fully charged most of the time.

12V lead-acid car (starter) battery – not recommended for solar charging

For solar charging applications, you instead want a deep cycle battery, similar to those used for marine vessels or golf carts – a typical car battery will not work. Deep cycle batteries are designed with larger plates and different chemistry to avoid the corrosive effect of frequently using the full capacity. They are designed to be regularly deeply discharged using most of its capacity.

Flooded vs. Gel vs AGM

There are a few types of lead acid deep cycle batteries: flooded, sealed gelled, or sealed AGM. For most situations a sealed AGM (Absorbed Glass Mat) is the safest and best option. AGM batteries require little maintenance. There is no need for ventilation and they will not spill. Flooded batteries have the advantage of being significantly less expensive, but they require adequate ventilation, maintenance, and also have the potential liability of tipping or spilling.

AGM batteries are typically lighter and less expensive per amp-hour compared to gel. As an example, on AltE Store a Trojan AGM 12V 100 amp-hour battery is 64 pounds and $241, or 0.64 lbs/AH and $2.41/AH.  A Trojan Gel 12V 77 amp-hour battery is 52 pounds and $231, or 0.68 lbs/AH and $3.00/AH.  In addition gel batteries need to be recharged in a specific way that is not optimal for solar. Basically, AGM batteries are more forgiving in the way that they are recharged.

12V AGM Battery

12V Gel Battery

If lead acid batteries are maintained properly, they will function at 80-90% efficiency. It is important to maintain a full charge when ever possible, because it will extend its life and maintain a higher efficiency. Always use a charge controller with solar panels, so they don’t over charge the battery or apply the wrong voltage. We’ll discuss more about how to select a charge controller in a future post.

Charging Station Application

I recently built a portable but powerful solar battery system to power some LED string lights, a stereo, and an evaporation cooler. I used a Xantrex PowerPack 1500 AGM battery, MorningStar SunSaver charge controller, and two 25-Watt solar modules. The Xantrex PowerPack comes with a built-in AC inverter, surge protector, low voltage disconnect (LVD), and can be wheeled around. The wheels and handles are helpful because it is quite heavy at 57 lbs.

Xantrax PowerPack 1500

Morningstar Charge Controller

A less expensive alternative is the Trojan sealed AGM deep cycle batteries. The Trojan 22-AGM batteries are similar in size to the Xantrex PowerPack, but it does not have all of the extra features listed above.

The final touch is to attach a cigarette lighter socket to the load terminal on the charge controller. This allows you to draw a load directly from the solar panels when there is enough sunlight or from the battery when there is no solar production. You can use any 12Vdc devices straight from the cigarette lighter or you can use a DC/AC inverter to power 120Vac devices.

I used a similar system to build a solar powered cell phone charging station at the 2012 Dumbo Arts Festival. In this project we used two of the Voltaic 17 Watt, 18 Volt solar panels, which were embedded into a dodecahedron shaped sculpture. The cell phones all charged from the DC side of the battery with cigarette lighter chargers. This is more efficient than using the AC inverter because we are simply stepping down the voltage from 12Vdc to 5Vdc. Also, by avoiding the use of the AC inverter, we don’t need to convert the DC to AC and back to DC again.

Joe O’Connor is a guest blogger for Voltaic. In addition to making cool things with solar, he does consulting on alternative energy and is pursuing his Master’s Degree in Manufacturing Engineering at NYU Poly.

13 Responses

  1. Edward Bibiano

    Question: Why is the solar controller charger only compatible with the “sealed” lead acid deep cycle batteries? I can’t find any explanation for the purpose of the “Sealed vs Unsealed lead acid battery with the use of any solar powered system.
    I have 2 each group 27 deep cycle (new) for my 5th wheel and wanted a solar kit to charge up the batteries while “Boon-Dock camping.

    Reply
    • Voltaic Systems

      Hi,

      Max power consumption of the Touchlight is 3.5 Watts. The panel used in the One Room Touchlight is rated at 6 Watts.

      Reply
  2. ololade

    I have Epson changing controller and I have two solar panel 135watts can I use it to charge two 100amh battery

    Reply
  3. robert dowling

    Hi John.great article.i have a project to solo walk across a salt lake in Bolivar south america.A 6 week hike without power,i will have a cart attached to a body harness pulling along water /food equipment. I need a 12 v car battery attached to a solar charger to drip charge the battery as i walk along,day time light 12 hours.temp 21-25 c and a drop to 10-15c at night.I wish to use the cig lighter as a charge unit for my video camera which has a 7.2v cga-d54 lithium-low battery.
    I own a solar 12w output would this be enough ?has attachment for the cig and clamps for 12 v battery charging during the day.i plan at night to plug into a charger unit via the deep cell battery any advise would be fab.reg rob

    Reply
  4. s houghton

    can these batteries be conected up to create 230 volt for use in my home charged by solar panels

    Reply
  5. Ken Wells

    I’m attempting to build a solar light system for our duck avery. They require extra light hours for laying eggs and also predator control. Your article above has been most helpful for me to understand how to do this. Thanks, Ken.

    Reply
  6. Dave Brik

    Thanks for your great post on choosing batteries for solar system. I’ll be waiting for your next post for right selecting of a charge controller.
    Can I use also by electrical devices without cigarette lighter connector with such a battery system? In other words, does this system has also standard electricity socket?

    Thanks!

    Reply
    • Joe O'Connor

      Hi Dave, You can use electronics that you would plug into your wall in your home (120Vac) with this setup, but you would need to use an inverter with your battery. The Xantrex PowerPack that I mentioned in the article comes with an inverter built-in, but the other batteries would require an inverter such as the BELKIN F5C400-300W Power Inverter.

      Reply
  7. Ben

    Excellent summation on batteries and solar. Looking forward to the entry on charge controllers.

    Reply

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.